Chinese Scooter Club Forum Index Chinese Scooter Club
..:: THE ORIGINAL AND STILL THE BEST!! ::..
 

Tank Eagle 50 No Turn signals or barake lights.

 
       Chinese Scooter Club Forum Index -> Body and Electrical Workshop
Author Message
RA25



Tue Jul 15, 2008 5:33 am   Tank Eagle 50 No Turn signals or barake lights.  

Yes I did it again. I got another scooter... will someone help me! LOL

It is a Geely or Roketa or.....

It is a Tank Eagle 50 50-qt-5 thing. I got a good price since the owner told me the "Axle" was broken on it. It was really the engine swing arm. A few minutes and all is well. It is a 139QMB. Runs good! Much quicker then the Roketa I just sold. Still I am having issues.

First no lights worked. Missing front head light bulb, Easy. Next all the marker lights were burned out. I think it has more then the 11 miles on the speedo. Now the head light and markers are working. No Brake or turn signals though. I tore down the instrement panel and nothing on any of the three wires at the flasher. I took (broke) off the front cover and there is an alarm/ starter system factory wired to the bike. I have heard stories. This one got to close to the resistors (What are the resisters for?)

So should I replace the alarm since I don't have a fobb for it? Can I wire around it? Why is there no power to the lights and where does it come from? Any one have a good wiring diagram for a 2005ish with the factory alarm system?

Oh the fun I am having.

Rodney
 
px166bajaj



Tue Jul 15, 2008 5:47 am    

I expect the battery is knackered. the originals don't last long. Put a tester on it and look for 12 volts. The alarm can be removed but you may have a problem with turning off unless you replace the earth from the Ignition switch. As the alarm has a remote start stop function, it needs to be earthed to stop the bike. Removing it removes this connection.
 
RA25



Tue Jul 15, 2008 1:03 pm    

That is the weird thing, the alarms ground was never attached. I do have a psare battery. I'll try that.

Any wiring diagrams out there?

Rodney
 
RA25



Wed Jul 16, 2008 2:10 pm    

px166bajaj you are right on the mark. I charged the battery and everything works. lol I thought there should be enough power with the scooter running to run the systems. I was so wrong.

Thanks again!

Rodney
 
px166bajaj



Wed Jul 16, 2008 2:12 pm    

You're welcome :wink:
 
 
       Chinese Scooter Club Forum Index -> Body and Electrical Workshop
Page 1 of 1


This page is a free forum hosting archive page from a ForumWise free forum.
Powered by phpBB ©